September 5, 2026
AC Shifting Guide: How to Move Your AC to a New House Safely
Moving house? Here is how AC relocation works, why gas must be recovered correctly, and how to avoid damage during transport.
Relocating an AC is more than unscrewing it and refitting it. A careless move can cost you the gas, a damaged compressor and a leaking system.
Steps in a proper relocation
- Pump down: the refrigerant is collected in the outdoor unit so it is not released and not lost
- Disconnect power, drain and pipes, closing the service valves
- Cap the pipe ends to keep moisture and dirt out
- Transport upright, secured, with the outdoor unit never laid on its side for long
- Inspect the old pipe, replacing damaged or short pipes
- Re-install following the full installation checklist, including vacuuming and flare joints
- Test cooling, current and drain
Common mistakes
- Releasing the gas to the air
- Reusing old flare nuts and damaged flares
- Skipping the vacuum after refitting
- Carrying the outdoor unit on its side for a long journey
- Mounting on a weak bracket
Should you re-use the pipes?
Used pipes can be reused only if clean, undamaged and the right size. Moisture or kinks mean new pipes.
Plan the new house
- Check where the outdoor unit will sit
- Check power, earthing and drain route
- Measure the pipe length needed
Cost factors
Distance, pipe length, wall type, floor level and whether gas needs to be refilled affect the price. Ask for an estimate before the work begins.
Roman Urdu mein khulasa: AC shift karte waqt gas ko pump down kar ke outdoor unit mein bandh karein, pipes ke sire band rakhein aur nayi jagah par vacuum ke saath dobara lagwayein.