August 10, 2026
Split AC Installation Checklist: What a Good Installer Does
Use this checklist to make sure your new split AC is installed correctly: pipe length, vacuuming, drain slope, outdoor unit placement and testing.
A good AC badly installed will leak water, lose gas and cool poorly. Use this checklist when your technician arrives.
Before installation
- Choose the indoor location: away from direct sunlight and furniture that blocks airflow, with a short path to the outdoor unit
- Plan the outdoor unit: on a solid bracket or base with clear space around it, shaded if possible
- Check the power supply: a dedicated line and breaker of the right rating, with proper earthing
During installation
- Mount the plate level so condensate drains properly
- Drill the wall hole with a slight downward slope to the outside
- Use copper pipes of the correct size, insulated along the full length, and keep the run as short as practical
- Flare the joints correctly, since poor flares are the biggest cause of later gas leaks
- Pressure test with nitrogen or the unit's own gas as per the maker's procedure
- Vacuum the pipes to remove air and moisture before opening the valves
- Seal the wall opening to stop insects and water
- Route the drain pipe downhill without sagging or kinks
After installation: the test
- Cooling starts within a few minutes and the pipe temperature drops
- No vibration or rattling from the outdoor unit
- Drain water flows outside
- Current draw is within the rated value on the nameplate
- Remote functions work
Warning signs of a bad job
- No vacuum pump used
- Joints taped instead of flared
- Bare copper pipe with no insulation
- Outdoor unit wobbling on the bracket
Our installation pricing starts at Rs. 3,500, and the final amount depends on the pipe length and wall type.
Roman Urdu mein khulasa: Achi installation mein level plate, durust flare joints, vacuum aur drain ka sahi dhalan zaroori hain. Vacuum ke baghair gas lagana ghalat hai.