September 10, 2026
Washing Machine Not Draining: Causes and How to Fix It
Water stuck in the drum? Check the drain filter, hose and pump first. Here is the full list of causes for a washing machine that won't drain.
A washer full of water after the cycle is annoying, but the cause is often simple.
Safety first
Unplug the machine and keep towels ready. Water in the drum can be several litres.
Check these first
- Drain hose: is it kinked, squashed behind the machine or blocked? Straighten it
- Drain filter (front loaders): usually behind a small panel at the bottom front. Put a shallow tray under it, open slowly and remove coins, lint, buttons and small socks
- Drain standpipe or sink outlet: make sure water drains freely there
- Excess detergent: too much suds can stop draining and the machine may pause the cycle
Parts that fail
- Drain pump: noisy, humming or silent. A pump with a jammed impeller or a burnt motor needs replacing
- Lid or door lock switch: many machines will not drain or spin unless the lock confirms the door is closed. A faulty lock is a frequent reason
- Water level (pressure) sensor: wrongly reports water level
- Control board: may not send power to the pump. See washing machine board faults
How to tell pump from board
If the pump hums when the machine tries to drain, the pump is probably jammed. If it is silent and the pump tests fine, look at the wiring or the board.
Prevention
- Check pockets before washing
- Use the correct amount of detergent
- Clean the filter every few months
- Do not overload
For more care tips, see washing machine maintenance.
Washing machine repair in Sargodha
Roman Urdu mein khulasa: Pani na nikle to drain hose aur filter check karein. Phir drain pump, door lock ya board ka masla ho sakta hai.