How to Protect Your LED TV from Power Surges and Lightning
Voltage spikes are a leading cause of dead TVs. Learn simple protection steps and what to do during storms and load shedding.
Most power board failures follow a voltage spike. In Pakistan, power returning after load shedding and thunderstorms in the monsoon are common causes.
What a surge does
A sudden spike can blow the fuse, burn the rectifier and switching parts on the power board, or damage the standby circuit and the main board. TVs often die the instant electricity returns.
Protect your TV
- Use a quality surge protector with a power rating suitable for your TV. Cheap multi-plugs usually have no real protection.
- Consider a voltage stabilizer or protector with delay in areas of unstable supply.
- Unplug during thunderstorms, including the antenna, dish or cable connection, which can carry lightning energy.
- Switch off at the wall during long power cuts, and turn it on again a few minutes after power returns.
- Check wiring and earthing at home. Poor earthing makes surges worse.
Do not
- Plug TV, microwave, iron and AC into the same cheap extension
- Leave the TV on standby for days during storms
- Use damaged plugs and cables
If the TV already got a surge
Do not repeatedly try to power it on. Unplug it and have it checked. Repeated attempts on a damaged board can cause more failure.
Typical repairs after a surge
- Fuse and rectifier replacement
- Capacitor and switching transistor replacement
- Standby circuit repair
- Backlight driver repair
Most of these can be repaired on the board, see PCB repair vs replace.
Roman Urdu mein khulasa: Bijli ke spike se TV ka power board jal jata hai. Achha surge protector lagayein aur toofan mein plug nikal dein.