LED TV Has Sound But No Picture: Causes and Diagnosis
Your LED TV plays audio but the screen is black. This is usually a backlight, power board or main board problem. Here is how to tell.
Sound without a picture is one of the most common LED and LCD TV faults. The good news is that sound proves the main board is at least partly working.
The flashlight test
- Turn the TV on in a dark room
- Shine a torch at an angle across the screen
- Look for a faint image
Faint image visible: the panel and picture path are working, but the backlight has failed. No image at all: the fault may be in the T-CON board, the main board, or the panel.
Likely causes
Backlight failure
LED strips behind the panel are wired in series. If one LED burns out, the whole string can shut down. The TV may light up for a second and then go dark, because the driver detects the fault and switches off. See LED TV backlight problems.
Power board / LED driver
The power supply board contains the circuit that drives the backlight. A failed capacitor or driver can leave the backlight without power.
Main board
If the main board does not send the backlight enable signal, the backlight never turns on.
T-CON board
This board feeds the panel. If the backlight works but the picture is missing, or you have lines, it is a suspect, see LED TV screen lines.
Do not try
- Opening the TV with the power connected. Power boards can hold a dangerous charge
- Pressing on the panel, which cracks the screen
What to tell the technician
- Does the screen flash briefly at start?
- Does the standby light work?
- Did it follow a power cut or storm?
Roman Urdu mein khulasa: Awaz hai magar tasveer nahi to torch test karein. Halki tasveer nazar aaye to backlight kharab hai, warna power board, main board ya T-CON check hoga.