AC Gas Filling Explained: When You Need It and How It Is Done
A plain-language guide to AC gas (refrigerant) filling: signs of low gas, the correct process, and why leak testing matters before every refill.
Many people believe an AC needs gas every year, like oil in a car. That is not true. The refrigerant circulates in a sealed system and is not consumed. If the level is low, there is a leak.
Signs your AC is low on gas
- The AC runs for long hours but cools weakly
- Ice forms on the indoor coil or on the thin copper pipe
- A hissing or bubbling sound near the pipes
- The outdoor unit's thick pipe is not cold to touch
- Water drips from the indoor unit after the ice melts
The correct way to refill
A proper job has these steps:
- Pressure check with gauges to confirm the gas is actually low
- Leak search at the flare joints and valves (nitrogen pressure test or leak detector)
- Repair the leak, for example by re-flaring a joint or replacing a valve
- Vacuum the system to remove air and moisture
- Weigh in the correct charge for the unit
- Check cooling, current and pressures after charging
Skipping the leak repair means the gas escapes again, usually within weeks.
Which gas does your AC use?
The type is printed on the outdoor unit's data plate: R22, R410A or R32. They cannot be mixed. See our refrigerant comparison.
Questions to ask the technician
- Which gas is my AC using and how much is being added?
- Where was the leak found?
- Is a gas gauge being used?
Things to avoid
- Topping up "by feel" without gauges
- Adding a different gas type
- Buying cheap cans of unknown gas
Our standard pricing for gas filling starts at Rs. 2,500, and the exact cost depends on the gas type, the unit size and any leak repair needed.
Roman Urdu mein khulasa: AC ki gas khatam nahi hoti, kam tab hoti hai jab leakage ho. Sahi tareeqa: pressure check, leak repair, vacuum aur phir durust miqdar mein gas.