AC Blinking Lights and Error Codes: How to Read Them
What a blinking light or error code on your split AC means, why codes differ by brand, and what to do before calling a technician.
Modern split ACs report faults through blinking lights or codes on the display. The meaning differs by brand and model, so there is no universal chart.
What the lights usually report
Common categories across brands are:
- Indoor or outdoor temperature sensor fault
- Fan motor fault (indoor or outdoor)
- Communication fault between indoor and outdoor units
- Compressor or inverter module (IPM) protection
- Over-current or voltage protection
- Gas or pressure protection
- Drain pump or water-full fault (in some models)
What to do first
- Note the exact code or the blink pattern (for example, "three blinks, pause")
- Switch the AC off at the breaker for five minutes and restart
- Check the filter and the outdoor unit for blockage
- If the code returns, note it and call a technician with the brand and model
Why a code matters
Codes help the technician go straight to the problem. For inverter systems, an IPM or overcurrent code can be caused by a failed power module, a shorted compressor winding or low incoming voltage. Service documents warn that DC bus capacitors on these boards hold a dangerous charge and must be discharged before handling.
What you should not do
- Do not open the outdoor unit
- Do not keep restarting an AC that repeatedly trips
- Do not search for a code from a different brand
Keep your manual
Look for a "troubleshooting" page, or find the model number on the unit's label.
See also: inverter AC PCB faults.
Roman Urdu mein khulasa: AC ki blinking lights har brand mein alag matlab rakhti hain. Code note kar ke ek baar restart karein, phir bhi aaye to mechanic ko brand aur model batayein.